Focusing on the R&D and manufacturing of riveting machines
PRODUCTS CENTER
Bolivia Vibrating plate riveting machine,Automatic feeding riveting machine,Cutch riveter
Product Description
Processing scope and requirements:
● For riveting join clutch corrugated plate and fricationdisc.
● Driven plate assembly diameter range is Ф228mm~Ф430mm.
● Driven friction disc and corrugated plate diameter is Φ196mm~Ф370mm.
● Corrugated plate rivet hole dimater is 5.2mm（0-0.15mm）:friction disc rivet hole diameter is 5.2mm (0-0.2):
● Both sides of rivet total 18 Nos and processing time less than 55 Seconds.
● Evenly and without skewing after riveted, flanging area no clearance check by 0.05mm feeler gauge.
● Riveted torque meter detacts 10 pieces clutch assembly (total 180 rivets) and torque in the range of 1-1.75N.m.
Equipment requirements:
● The device operation interface is English.
● Upper tool center guide bar reposition by spring.
● Lower riveting tool guide bar stretching by pneumatic, and guide bar pressure adjusting by pneumatic valve.
● Lower riveting tool guide bar's pressure large than upper tool spring force.
● Riveting tool Service life more than 50000 times.
● When the equipment fails, it can stop automatically and there is sound and light alarm.
● The master cylinder uses a precision pressure regulator to connect the cylinder pressure. In the air-off state, the cylinder head can remain in place and does not fall off.
● Automatic grease filling is added to the main lubrication area of the equipment. If the manual lubrication that must be marked.
● The device power switch is locked and can be locked when the power is turned off.
● Emergency stop button with self-locking function, mushroom head is red, start button is green.
Equipment operation process:
● The actuator is in place when machine is turned on, the vibrating plate to detect the rivet signal to determines whether switch on or not.
● Manual put clutch to position and sensor detact placed or not to prevent misues,and then step on the foot switch.
● Pneumatic sylinder down and put rivet on hole ,riveting ,and rivet slide way to separate rivet one time.
● Riveting cylinder rises to original position and fixed rivet channel to separate one time.
● Return to execute the next operatio.
Contact us
Leave your phone number and we will contact you soon.