Servo riveting machine JM12T-S

A.Technical requirements:

1.The equipment feedding is driven by servo;

2.Riveting power head model JM12,Max.pressure 20Kn;

3.The working principle  is radial (11 petal plum blossom shaped motion trajectory principle);

4.Equipment protection and collision prevention facilities;

5.Equipped with zero position switch and limit switch;

6.Equipment working : equipment startup → fast forward according to the set descent distance (reaching 100mm/2-3S) → riveting for 1.5S → holding pressure for 0.5S → fast forward retreats to the set position for 2S;

B.Structure introduction:

1.The equipment mainly consists of a base and column, a radial riveting machine head, a servo slide, etc.

2.JM12 radial riveting machine special head can achieve flat head forming riveting of 45 # materials below

   diameter 12.

3.The servo slide is composed of a servo motor, precision reducer, ball screw, linear guide rail, motion

   platform, and related protective facilities. It is mainly used for precise up and down movement of the

  riveting machine head to achieve riveting requirements, with a feed accuracy of ± 0.02.

4.Servo slide zero position and limit switch, screw protection cover.

C.Equipment parameters:

1.Travel: ≥ 155, displacement repetition accuracy ± 0.02;

2.Working pressure: 20Kn;

3.Equipment power supply: three-phase 380V, 50Hz;

4.Equipment operating environment temperature range -5-45 ° C

5.Safety: Complies with the electrical standard GB 706-1995;

6.Noise standard: Under normal working conditions, the noise level is below 75dB;

D.Equipment configuration and brand:

1.Servo motor driver                                        Panasonic

2.Reducer                                                         Neustadt

3.Screw machine guide rail and slider             Shangyin

4.Bearings                                                          NSK

5.Proximity switch                                             China